
Clean, bright pavers with every joint refilled
Paver Cleaning and Joint Sand in New Port Richey, FL
Get a free price from a local contractor on washing your New Port Richey pavers and refilling the joints.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can I get my pavers cleaned in New Port Richey without a long wait?
A local contractor cleans pavers across New Port Richey, FL, and you will hear back within 1 business day, usually much sooner. New joint sand is part of the job, and the free estimate carries no pressure to book. To start, call (727) 291-7236.
Cleaning lifts the algae, mildew and stains that dull pavers in this humid corner of Pasco County, so the surface looks brighter and grips better underfoot. Fresh sand is brushed into the gaps, which firms up the pavers and gives weeds less room. A walkway gone green over the summer starts to look like part of the yard again. Point out the worst spots when you send a quick estimate request.
Paver Sealing New Port Richey Is Proud to Serve Tampa Bay

What is part of a paver cleaning job?
The work covers a stain treatment, a gentle wash and new joint sand once the surface dries. Book it by itself, or as step one before sealing. Shady corners and the ground near sprinkler heads take longest. To line up a cleaning, call (727) 291-7236.
Stain treatment
A product matched to the problem, whether algae, rust or salt haze, goes on first and is tried on a small patch.
Gentle wash
A fan nozzle held back from the surface cleans without driving the sand out of the joints.
Fresh joint sand
Sand is swept into each gap after the pavers dry, then settled and cleared from the surface.
Sealer, if you want it
Sealer can follow once everything is dry. The sealing guide covers what it adds.
What are the signs my pavers need cleaning?
Watch for a green or black film in shaded corners, rust-colored bands by the sprinklers, weeds in the joints, white patches on newer pavers and sand left on the drive after rain. Algae matters most on a pool deck or front walk, where a slick surface can cause a fall. To have yours looked at, call (727) 291-7236.
Is cleaning enough, or should I seal too?
Cleaning restores how the pavers look now, and sealer helps decide how long that look lasts. A wash alone costs less today, but algae, stains and fading return on their own schedule. A coat makes later washes easier, though it has to be redone every three to five years. If you want the coat, say so when you send a quick estimate request.
How often should pavers be cleaned in New Port Richey?
There is no single date. Pavers in damp shade or beside sprinklers need attention sooner than an open, sunny driveway, and Rusty's Pro Wash and Seal says algae that returns quickly after a wash is a sign it is time to reseal. A yearly look is a reasonable habit. To plan one for your property, call (727) 291-7236.
Does a harder blast get pavers cleaner?
No. Unilock says high pressure can damage pavers or blow out the joint sand, and it recommends a fan nozzle at a 30 degree angle about 12 inches away. It also advises against wire brushes, which leave metal particles that can rust. Ask what nozzle the contractor uses when you send a quick estimate request.
Technique matters more than horsepower. A product chosen for each stain does the heavy work, and the wash only carries the residue away. To ask about the method before you book, call (727) 291-7236.
What are the rust-colored marks near my sprinklers?
Often they are mineral deposits. Rusty's Pro Wash and Seal says hard water leaves deposits on unsealed pavers and that sprinkler heads hitting one strip each morning cause local wear. A treatment lifts the marks, and the spray gets aimed elsewhere. Point them out when you send a quick estimate request.
Why are white patches showing on newer pavers?
A chalky white film on new pavers is typically efflorescence, a salt that works its way out of the concrete. Unilock says it usually fades in two to three months, can take up to a year and must clear before sealing. Rusty's Pro Wash and Seal adds that saltwater pools speed it up. Not sure whether it is old sealer? Say so when you phone (727) 291-7236.
How long do pavers need to dry before sealing?
A few hours in warm sun or about 24 hours in cool shade, according to Unilock. Rain stretches that, which is why a wash and a seal often fall on separate days. Find out what happens to the schedule if rain is forecast when you send a quick estimate request.
Which paved areas at a New Port Richey home can be cleaned?
Any paved area can be washed, whether a drive, a pool deck, a patio or a front walk. Each collects its own kind of grime, so the product and the method change. To start with yours, send a quick estimate request.
Driveways
A driveway carries tires, oil drips and the longest stretch of open sun. Cleaning one keeps the color even and the joints full under the weight of a car.
Pool decks and lanais
Bare feet, splashing and pool chemicals wear a deck in a different way than a drive. Cleaning one should leave a surface that still gives good footing when wet.
Back patios
Patios often sit under a roof line or a tree, so algae gets a head start in the damp corners. Cleaning one begins with the greenest, dampest spots.
Front walks and entries
Front walks pick up soil, mulch and drips from planters. Cleaning yours is a small job, yet it is the first thing a guest steps on.
What leaves New Port Richey pavers dirty?
Lost sand, damp-spot algae, sprinkler minerals, leaf stains and salt with sun lead the list. A wash handles some of these, and sealing or repairs handle the rest. To see which ones fit your house, call (727) 291-7236.
1. Sand lost to summer storms
Rusty's Pro Wash and Seal says summer storms soak pavers and speed up joint sand erosion. Once joints run low, pavers shift and weeds move in, so new sand goes in before any sealer.
2. Green growth in damp, shaded spots
Humid Gulf air keeps shaded patios, pool decks and poorly drained corners wet, and mold, mildew and algae thrive there. Left alone, that film turns slick underfoot.
3. Mineral marks from sprinklers
Hard water leaves deposits on unsealed pavers, and sprinkler heads that hit one strip every morning leave a band of wear. Moving the spray off the pavers helps, and the marks get treated before sealing.
4. Stains from leaves and acorns
Where live oaks hang over a drive, leaves and acorns leave tannin stains that sink into pavers with no coat on them. Rusty's Pro Wash and Seal lists this as a common Tampa Bay stain.
5. Salt and sun near the water
New Port Richey sits close to the Gulf, and the same company says salt air and saltwater pools add stress to pavers. A wash shows what color is left, and sealing afterward helps keep it.
What does paver cleaning cost in New Port Richey?
Published Tampa Bay prices usually bundle the wash into the full job, which runs about $1.25 to $2.50 per square foot with joint sand and sealer. Rusty's Pro Wash and Seal says most companies keep a minimum of $500 to $1,000, and that surface condition usually matters more than material. A wash alone should come in lower, so ask for it as its own line. For a price on your property, send a quick estimate request.
If you plan to seal as well, ask for one combined price and one written scope. A 1,000 square foot driveway comes to about $1,250 to $2,500 at the published range. For help weighing the two, call (727) 291-7236.
Thinking about protection too? Paver sealing covers what a coat adds. You can also see where contractors work or head back to the home page.
| Paved area | Typical example | Full clean, sand and seal |
|---|---|---|
| 250 sq ft | Small patio | $500 to $1,000 (minimum charge) |
| 800 sq ft | Pool deck | $1,000 to $2,000 |
| 1,000 sq ft | Driveway | $1,250 to $2,500 |
| 2,000 sq ft | Driveway plus pool deck | $2,000 to $4,000 |
These are the examples a Tampa Bay paver company publishes, built on a range of $1.25 to $2.50 per square foot. Ask any contractor to list the cleaning and the sealing as separate lines, since a wash alone costs less than the full job.

Why use a local contractor to clean my pavers?
A contractor who works around New Port Richey knows what humid air, hard-water sprinklers and Gulf salt leave behind. Hold the quote up against the published range on this page and decide at your own pace. To begin, send a quick estimate request.
A contractor from this side of Pasco
A company that works around New Port Richey already knows the Gulf side of the county. That means the first look at your pavers starts with local habits, not guesses.
An estimate that asks nothing of you
The look at your pavers and the price are free. If the number does not fit, say no and the matter is closed.
Tampa Bay prices to hold a bid against
Paver companies around the bay publish what they charge per square foot, and this site passes that range along. A bid far outside it deserves a question about what is left out.
Time to think it over
Ask for the price in writing and take as long as you need. The contractor standards page walks through what to confirm with a contractor first.
Want a free estimate to clean your New Port Richey pavers?
Use the short form or phone, and a contractor answers within 1 business day, often earlier.
Free, no obligation

What do cleaned pavers look like around New Port Richey?








How does the paver cleaning process go, step by step?
If you skip the sealer, the visit stops once the joints are full. To set a date, call (727) 291-7236.
1. Look it over
Before pricing the cleaning job, the contractor walks the area. They note dips, loose or cracked pavers, old sealer, stains and where water collects.
2. Protect and wash
Plants, screens and the garage door are covered, and the sprinkler timer is switched off. The pavers are then washed in sections with a fan nozzle held back from the surface, so the joint sand is not blown out.
3. Treat what is left
Algae, rust and salt haze each get a cleaner made for that stain. The contractor tests it on a small patch first.
4. Fill the joints
When the surface is dry, fresh sand is brushed into the joints and packed down. Any extra on the surface is cleared away, because sealer would lock it there.
5. Seal and walk it with you
When the job includes sealer, the contractor sprays it on and smooths it with a roller. Then the contractor walks you around the finished area and says when feet and tires can return.
Frequently Asked Questions
Is it a good idea to pressure wash pavers?
Yes, when the pressure stays gentle and the joints get new sand afterward. Unilock advises a fan nozzle at a 30 degree angle about 12 inches from the surface, and says high pressure can damage pavers or blow out the sand. Ask the contractor what nozzle they plan to use.
What is the most effective way to clean patio pavers?
A treatment for the specific problem, followed by a gentle wash, works better than raw force. Algae and mold need one product, rust another, and salt haze a third. Unilock also warns against wire brushes, which leave metal bits that can rust on the surface.
Can I power wash my patio pavers?
A contractor can, with care. Too much pressure scars the surface and empties the joints, so new sand normally follows the wash. A fully dry surface then comes before any sealer, which Unilock puts at a few hours in warm sun or about 24 hours in cool shade.
How often should pavers be cleaned and resealed in Florida?
Sealer is usually redone every three to five years, per Unilock and Rusty's Pro Wash and Seal. Cleaning can be needed sooner on pavers that stay damp, since Tampa Bay humidity feeds mold, mildew and algae on pool decks and shaded patios.
How much does it cost to clean and seal pavers?
Around Tampa Bay, paver companies publish about $1.25 to $2.50 per square foot for the full job. Most set a minimum of $500 to $1,000, so a small patio can run higher per foot. Repairs, and stripping a failed old coat, tend to be billed as extras.
Why do my New Port Richey pavers keep turning green?
Humid air, shade and sprinklers keep the surface damp, and that is what algae needs. Rusty's Pro Wash and Seal lists mold, mildew and algae as a Tampa Bay problem, especially on pool decks and poorly drained corners. Aiming sprinklers away from the pavers helps.
What are the rust-colored marks on my pavers?
Often mineral deposits from irrigation. Rusty's Pro Wash and Seal says hard water builds deposits faster on unsealed pavers, and sprinkler heads that hit one strip every morning leave a band of wear. The marks get a treatment made for them before any sealer goes on.
What is the white film on my new pavers?
Most likely efflorescence, a natural salt that rises out of concrete. Unilock puts the fade time at two to three months, though it can run as long as a year, and says to hold off sealing until it clears. Saltwater pools can speed it up.
Ready for clean, even pavers again?
Reach out by phone or the short form, and a contractor answers inside 1 business day, often much sooner.
Free, no obligation
